49 lines
2.0 KiB
Plaintext
49 lines
2.0 KiB
Plaintext
# Blastproof config
|
|
# WARNING : DO NOT PUT ANY NON-ASCII CHAR IN THIS FILE
|
|
|
|
# Serial port
|
|
# Define if the system is allowed to use the serial port
|
|
serial_port_enabled=true
|
|
# Define if system is allowed to push debug information on the serial port
|
|
serial_port_debuging=true
|
|
# Define if system is allowed to push errors on the serial port
|
|
serial_port_erroring=true
|
|
|
|
# Graphics
|
|
# Define the font to use
|
|
font=bitra-ascii-medium.fbm
|
|
# Define whether or not the boot animation should be played
|
|
disable_boot_animation=true
|
|
# Set the following both to 0 use highest resolution available
|
|
# Define the screen default horizontal resolution
|
|
default_horizontal_resolution=1920
|
|
# Define the screen default vertical resolution
|
|
default_vertical_resolution=1080
|
|
|
|
# InitFS
|
|
# Define the type GUID used for InitFS
|
|
# Warning : DO NOT modify this. It's common to all InitFS installation
|
|
initfs_partition_type_guid=8362b434-d825-11f0-a68f-10ffe08423a6
|
|
# Define the InitFS partition GUID. Automatically generated by build script
|
|
initfs_partition_guid=UUID_GENERATION_NEEDED_INITFS
|
|
# Define the type GUID used SignSyst
|
|
# Warning : DO NOT modify this. It's common to all InitFS installation
|
|
signsyst_partition_type_guid=da0048b4-d826-11f0-b877-10ffe08423a6
|
|
# Define the SignSyst partition GUID. Automatically generated by build script
|
|
signsyst_partition_guid=UUID_GENERATION_NEEDED_SIGNSYST
|
|
|
|
# Shelter
|
|
# All the following elements are passed to the kernel
|
|
# Define the log level, value can range from 0 to 6
|
|
kernel_log_level=0
|
|
# Define wheither or not the kernel should test and benchmark all of his subsystems at boot time
|
|
kernel_test_benchmark=true
|
|
# Define the number of iterations for tests and benchmarks, must be between 0 and 10000
|
|
kernel_bench_iterations=10000
|
|
# Define if the log subsystem should output on the serial port
|
|
kernel_log_disable_serial_port=false
|
|
# Define if the serial port should be usable
|
|
kernel_disable_serial_port=false
|
|
# Define the size of the ring buffer for logging information. Value is in 4KB pages, ranging from 0 (ring logging disabled) to 65535
|
|
kernel_log_ring_size=2048
|